PGT Window Replacement Nationwide | Sightline Windows & Doors Kendall

PGT Window Replacement: The Kendall Owner’s Guide

PGT window replacement in Kendall typically runs $340-$780 per opening for installed sash, frame, or hardware replacement, depending on series and glazing spec. We stock PGT-compatible parts for same-day repair on most Winguard and WinGuard Vinyl series, and we carry the measured survey to your door before any work begins. Most Kendall owners first notice the problem when a window won’t stay open on its own, when condensation appears between impact-laminated panes, or when the lock no longer draws the sash tight against the weatherstrip - usually after a wet season or following years of UV exposure on south-facing elevations.

Call (786) 321-3319

Which PGT Models This Applies To

PGT’s product lines have distinct part ecosystems, and mismatching costs time. We regularly service Winguard Aluminum and WinGuard Vinyl series in Kendall, including single-hung, horizontal roller, and casement configurations. The Winguard Architectural System uses heavier-duty balances and tandem rollers rated for larger openings, while WinGuard Vinyl relies on proprietary constant-force coil balances and snap-in glazing beads that differ by vintage - pre-2018 beads were flat-backed, post-2018 use a radiused profile that seals tighter but cracks if forced into old frames.

To identify your part, locate the etched PGT logo in the glass corner and the AAMA label on the frame jamb; the series code (WGA, WGV, or PAS) tells us which balance, roller, or lock body to bring. We also match by physical measurement: sash width to the nearest 1/16 inch, visible glass dimensions, and frame depth (2-inch versus 2.5-inch for impact-rated assemblies). Sightline Windows & Doors Kendall is an independent service provider, not affiliated with PGT - we source OEM parts through verified distributors and stock quality aftermarket equivalents where the spec matches. For most hardware and balance replacements, the aftermarket option performs identically; for impact-laminated glass, we specify OEM to maintain the original design pressure rating.

Signs Your PGT Window Replacement Is Failing

• Sash drops or won’t stay open. The constant-force balance has fatigued or the balance shoe has cracked. In Kendall’s humidity, aluminum balance housings corrode faster than inland climates, and we’ve found shoes degraded after seven to nine years on coastal-exposure windows.
• Condensation between panes. The insulated glass unit (IGU) seal has failed, breaking the argon fill and fogging the sightline. On PGT impact windows, this means the entire laminated IGU needs replacement; the glass cannot be disassembled and resealed in the field.
• Lock operates but sash doesn’t compress. The keep or strike has shifted, or the multipoint lock rod has bent from repeated over-torquing. We check frame squareness first - a racked frame will destroy new hardware in months.
• Roller grinds or frame drags. Debris has embedded in the nylon roller, or the axle has corroded. Horizontal rollers in Kendall collect grit from limestone screenings and salt air; we clean the track and replace with stainless-axle rollers rated for coastal exposure.
• Glazing bead pops loose or cracks. UV embrittlement has shrunk the vinyl, or the bead was forced during a previous repair. We measure bead width and profile before ordering - the wrong bead profile won’t seat and will leak under wind-driven rain.

Before

After

Replacement Cost & What’s Included

Every replacement includes removal and disposal of the failed component, installation of the matched part, operation testing, and a documented photo record. The price we write before work starts is the price on the invoice - Haven Clause 1. Our 365-Day Done Right Promise covers the installation and the part; if the balance tension is wrong or the IGU fogs, we return and correct it. We pull permits when the replacement affects the impact rating or when Kendall’s building department requires documentation for code compliance.

DIY or Call Us?

An owner can safely check the AAMA label location, photograph the failed part, and verify the symptom - whether the sash drops under its own weight or the lock merely feels loose. What goes wrong in DIY is forcing a balance shoe out of a corroded jamb channel, cracking the vinyl frame, or installing a non-impact-rated IGU that voids the original certification. Impact glass is heavy and sharp-edged; a 36-by-60-inch laminated IGU weighs over 80 pounds and requires two people with suction cups and proper edge protection. We don’t recommend homeowners remove glazing beads from impact windows - the bead profile is load-bearing in the design pressure calculation, and improper reinstallation can compromise the entire assembly. Call (786) 321-3319 and we’ll bring the measured survey, the right part, and the documentation.

FAQs