Mr-Glass Windows & Doors Service Nationwide | Sightline Windows & Doors Kendall

Why Kendall Homeowners Choose Mr-Glass Windows & Doors

We provide independent Mr-Glass Windows & Doors in Kendall, FL service using OEM-grade parts and warranty-safe practices for every repair and installation. Our work is governed by the Haven Standard, which means you receive a written price before any tool is lifted and a documented photo record when the job is finished. We are not affiliated with or authorized by Mr-Glass; we are an independent service provider with factory-trained technicians who understand how these products perform in Miami-Dade’s High Velocity Hurricane Zone.

Call (786) 321-3319

Mr-Glass has been a practical choice in Kendall since the post-Hurricane Andrew rebuilding wave of the mid-1990s. The brand’s impact-rated single hungs and 3-panel sliding glass doors were installed by the thousands in the CBS ranch homes and two-story tract houses along Kendall Drive and Killian Drive. Those units are now 25-30 years old. The aluminum frames have faced decades of subtropical humidity, seasonal thunderstorms, and salt-laden air that accelerates corrosion on hardware and degrades frame seals. We see this pattern repeatedly in Kendall homes, and we know which Mr-Glass symptoms indicate a targeted repair and which point toward full replacement.

Call (786) 321-3319 to schedule your free estimate.

Why Trust Sightline Windows & Doors Kendall for Your Mr-Glass Windows & Doors?

Sonia Raman leads our crew. She grew up in Miami, trained in building construction technology at Miami Dade College, and spent the better part of two decades in the field doing window and door work across South Florida. Her crew has been measuring and setting frames in Kendall for years, most recently finishing a full impact-window retrofit on a block of townhomes near Dadeland Mall. Sonia insists on a dry-fit before any sealant touches glass. That habit has saved more than a few jobs from a costly redo. “Measure once, document it, then cut” is how she puts it.

Our technicians are background-checked, uniformed, and identified by license number before arrival, per Haven Clause 3. We keep current with Mr-Glass engineering bulletins and stock OEM-grade rollers, locks, and glass units for the product lines we service most often in Kendall. Every job carries the 365-Day Done Right Promise, written into the Haven Standard, not offered as a courtesy. If it’s not done right, we make it right.

We also offer a free second opinion on any written estimate. Bring us a competitor’s quote and we will review it at no charge.

Common Mr-Glass Windows & Doors Problems We Fix in Kendall

• Roller assembly failure in Mr-Glass 3-Panel Sliding Glass Doors. The triple-track roller system in these doors was designed for smooth operation under normal load, but Kendall’s salt-air environment corrodes the stainless steel rollers and axles faster than inland climates. The door becomes hard to open, the track wears unevenly, and eventually the frame racks out of square. We replace with OEM rollers, realign the track, and apply marine-grade lubricant. A field vignette: our crew recently serviced a Kendall home with Mr-Glass 3-panel sliding doors that were nearly impossible to open due to corroded rollers and a bent track. We replaced the rollers with OEM parts, realigned the track, and applied a marine-grade lubricant, restoring smooth operation and ensuring the door sealed properly against hurricane-driven rain. The homeowner avoided a full replacement and passed a subsequent wind mitigation inspection.
• Seal breakdown in impact-resistant laminated glass. Mr-Glass Impact Resistant Single Hung and Hurricane Impact Double Hung units rely on a sealed airspace between the laminated outer lite and the inner pane. When the edge seal fails, moisture enters, the glass fogs, and the impact rating is compromised. In Kendall, the combination of high humidity and thermal cycling from afternoon thunderstorms stresses these seals earlier than in drier climates. We can replace just the insulated glass unit (IGU) without replacing the frame, preserving the original installation and its Miami-Dade NOA compliance.
• Corrosion of stainless steel screws and hinges. Even “stainless” hardware in coastal environments develops surface corrosion that binds hinges and locks. The Mr-Glass Vinyl Casement Window Series uses a multi-point locking system with concealed hinges that are particularly sensitive to this. We disassemble, clean, and replace corroded fasteners with OEM-spec marine-grade hardware, then test the full lock sequence before we leave.
• Improperly sealed frames allowing water intrusion. Original installations from the 1990s often lacked proper sill pan flashing or used sealants that have since hardened and cracked. Kendall’s low-elevation neighborhoods see standing water after heavy rain, which finds every gap. We remove the affected trim, inspect for substrate damage, install proper sill pans where missing, and seal with compatible elastomeric sealant that maintains flexibility.
• Frame distortion from impact stress without visible glass damage. Mr-Glass impact products are designed to absorb hurricane debris strikes without breaching, but the frame can micro-deform. This stresses the operating hardware and compromises the weatherstrip seal. We measure frame squareness with digital levels and recommend reinforcement or replacement based on the degree of distortion.

Before

After

Mr-Glass Parts & Our Repair-vs-Replace Approach

We use OEM Mr-Glass replacement parts for critical components: rollers, locks, glass units, and weatherstripping. This maintains warranty compliance and ensures the product performs to its Miami-Dade NOA specification. For obsolete parts, we source high-quality aftermarket alternatives that meet or exceed the original performance criteria.

Our repair-versus-replace assessment is straightforward. If the frame and glass are sound and the failure is isolated to hardware or seals, targeted repairs extend service life at lower cost. If multiple seals have failed, the frame is distorted, or the glass has lost its impact rating, full replacement is more cost-effective over the life of the product. We explain this in writing before you decide. Haven Clause 1 means the price we quote is the price you pay.

Call (786) 321-3319 for a written estimate on your Mr-Glass repair or replacement.

Our Mr-Glass Service Process - Step by Step

1. 1
   Diagnosis with measured survey. We inspect the opening, document frame dimensions with digital measuring tools, photograph the condition of glass, hardware, and seals, and identify the Mr-Glass model and series. You keep a copy of the measured survey.
2. 2
   Written scope and price. Before any work begins, you receive a written quote that references the measured survey. The quote and the survey are the same document. No verbal estimates. No change orders.
3. 3
   Repair or installation with OEM-grade parts. Our technicians arrive uniformed, with license numbers provided in advance. We use OEM Mr-Glass parts for critical components or verified aftermarket equivalents for obsolete items. Every step is photographed.
4. 4
   Testing and documentation. We test operation, lock function, and seal integrity. We verify that the installed unit’s NOA number matches Miami-Dade’s approved product list, which inspectors check. You receive a documented photo record of the completed work.
5. 5
   Warranty registration. The 365-Day Done Right Promise is activated automatically. If anything is not done right, we make it right. The warranty document references the photo record and the original measured survey.

Mr-Glass Products We Service & Install in Kendall

We service and install the full Mr-Glass product line available in the South Florida market for Window Installation: Impact Resistant Single Hung windows for standard vertical openings; Hurricane Impact Double Hung units for applications requiring operable top and bottom sashes; 3-Panel Sliding Glass Doors for wide patio openings; and the Vinyl Casement Window Series for side-hinged applications requiring maximum ventilation control. We stock OEM rollers, locks, and glass units for these series locally to minimize turnaround time. For full-frame replacements, we specify by performance tier and price range, not by margin, drawing from our eight manufacturer lines including Mr-Glass, PGT, CGI, CWS, ES Windows, ECO Window Systems, Therma-Tru, and ViewLux.

We Also Service These Brands

Our technicians are factory-trained across multiple manufacturer lines. We regularly service and install PGT, CGI, CWS, and ES Windows products in Kendall homes, often in mixed-brand properties where the original builder specified different lines for different elevations. This multi-brand capability means we can match existing units or recommend alternatives based on performance requirements and budget, not inventory pressure.

FAQs - Mr-Glass Windows & Doors Service in Kendall

Book Your Mr-Glass Service in Kendall, FL

Call (786) 321-3319 to schedule your free estimate. A live person answers, 24/7. You will receive a measured survey you keep, a written price before any work starts, and a documented photo record when the job is done. The 365-Day Done Right Promise applies to every Mr-Glass repair and installation we complete in Kendall.

Written by Sonia Raman, Owner at Sightline Windows & Doors Kendall, serving Kendall since 2012.