VLX 80 Awning Window

VLX 80 Awning Window in Kendall, FL | Sightline Windows & Doors Kendall

The VLX 80 Awning Window is a top-hinged aluminum window built for homeowners who want fresh air without worrying about sudden Florida downpours. At Sightline Windows & Doors Kendall, we’re an authorized installation partner for ViewLux, which means every unit we sell is backed by factory warranty protection and installed to manufacturer spec. We’ve fitted these windows in homes from The Hammocks to Dadeland and throughout Kendall’s established neighborhoods. The thermal break construction keeps cooling costs in check during our brutal summer months, and the slim aluminum profile works with both modern and traditional architecture. Whether you’re replacing single-pane originals in a 1970s ranch or finishing a new build near Pinecrest, this window delivers. Call us at (786) 321-3319 to schedule your free on-site measurement and written estimate.

Call (786) 321-3319

Product Overview - VLX 80 Awning Window

The VLX 80 is engineered around a simple idea: a window should ventilate your home, not your wallet. The top-hinged design creates a natural rain shield - when those afternoon Kendall storms roll in off the Everglades, you can keep the window cracked without water pooling on your sill. That matters here more than most places. Our June through September wet season turns “quick shower” into “horizontal deluge” in about ten minutes.

The frame uses a thermal break aluminum system. Aluminum alone conducts heat like a highway; the thermal break inserts a polyamide barrier between interior and exterior frame sections. In practical terms, your air conditioner isn’t fighting against a 95-degree frame radiating inward all afternoon. The NFRC-rated energy performance reflects real testing, not marketing claims.

Architecturally, the VLX 80 sits comfortably in multiple contexts. The 1.97-inch profile width reads as refined rather than bulky, so it doesn’t overwhelm smaller window openings common in Kendall’s older homes. Yet the 0.079-inch wall thickness gives it the structural integrity for larger configurations in newer construction. We’ve installed these in everything from Mediterranean revivals near Snapper Creek to contemporary builds in the Kendale Lakes area. The clean sightlines and minimal frame depth let the glass do the visual work.

Buyers consistently point to three things: the rain-tolerant ventilation, the low-profile modern look, and the confidence that comes from a fully warrantied installation by a ViewLux-authorized partner. We’re not a handyman service buying units off a distributor rack. Sightline Windows & Doors Kendall orders direct, installs to factory standards, and handles warranty registration on your behalf.

Technical Specifications

• Frame Construction: Extruded aluminum with integrated thermal break, 0.079-inch wall thickness for structural rigidity
• Profile Width: 1.97-inch frame depth, slim sightline compatible with modern and traditional architecture
• Operating Style: Top-hinged awning, push-out or crank operation depending on configuration
• Glass Options: Clear standard; Frosted for privacy; Low-E for solar heat control; Tempered for safety-critical locations; Laminated for impact resistance and sound dampening
• Finish Options: Premium Black, Pure White, Anodized Silver, Bronze, Champagne, Teak Wood grain
• Screen Options: Fixed screen for permanent insect protection; Retractable screen for unobstructed views when not needed
• Energy Performance: NFRC-rated with thermal break technology
• Installation Standard: AAMA 2400/2410 compliant; AAMA 812 low-expansion foam sealant on all perimeter joints
• Performance Ratings: Tested for airtightness, waterproofing, mist prevention, and sound control
• Wind Load: Rated for local climate requirements including Miami-Dade County wind zones

Before

After

Performance Features

Thermal Efficiency

The polyamide thermal break creates a thermal bridge between interior and exterior aluminum surfaces. NFRC-rated performance gives you verified U-factor and Solar Heat Gain Coefficient numbers you can compare against other products. In Kendall, where air conditioning runs eight months a year, that thermal break isn’t a nice-to-have. It’s the difference between a window that pays for itself and one that bleeds money.

Acoustic Performance

Laminated glass upgrades add mass and a damping interlayer that disrupts sound waves. We’ve had homeowners near the Palmetto Expressway and along busy stretches of Kendall Drive specifically request this option. The frame’s tight construction, detailed below, seals against air gaps that would otherwise transmit noise. It’s not soundproofing, but it’s a meaningful reduction in traffic rumble and leaf-blower symphony.

Airtightness & Weather Seal

Multiple compression seals engage when the sash closes. The design targets the infiltration points where older awning windows typically fail: the hinge side, the lock side, and the bottom sweep. AAMA testing protocols verify performance under pressure differential. In a Kendall home, airtightness means less dust, less pollen, and less of that sticky humidity finding its way indoors.

Waterproofing

The top-hinged geometry is inherently defensive - rain hits the exterior glass and runs down, not in. Beyond that, the frame incorporates internal drainage channels and weep systems that manage water that does penetrate the primary seal. AAMA 2400/2410 installation standards, which we follow precisely, ensure the perimeter sealant and flashing layers work as a system. We’ve seen too many window failures in Kendall homes that traced back to skipped steps in the waterproofing sequence.

Wind Resistance

The 0.079-inch wall thickness and reinforced corner construction handle the pressure cycles our local climate demands. Miami-Dade County’s wind load requirements are among the strictest nationally; the VLX 80 meets them with appropriate glass selection and installation. For homeowners in Kendall’s more exposed areas, particularly near open water or on upper floors, the impact-rated laminated glass option adds both debris protection and structural redundancy.

Security & Hardware

Multi-point locking hardware engages at multiple locations along the sash, not just a single latch. The crank mechanism uses corrosion-resistant components - important in our salt-air environment, even inland in Kendall. For ground-floor installations or privacy-sensitive rooms, the laminated glass option provides forced-entry resistance beyond standard tempered glass. Hardware finishes coordinate with frame color selections.

Color & Glass Options

Six finishes cover the spectrum from statement to subtle. Premium Black has dominated our Kendall installations for the past three years - it pairs with the white stucco and dark trim combinations trending in local architecture, and it frames views without visual heaviness. Pure White remains the go-to for traditional homes, especially in neighborhoods like Kendale Lakes where original construction leaned lighter. Anodized Silver offers an industrial, almost commercial crispness that works in contemporary builds. Bronze and Champagne both read as warm neutrals; Bronze leans traditional Mediterranean, while Champagne has become surprisingly popular in transitional designs. Teak Wood grain finishes the aluminum in a convincing wood visual for homeowners who want the warmth of grain without the maintenance reality of actual timber in our humidity.

Glass selection should match function to location. Clear glass is the baseline - use it where views matter most and privacy isn’t a concern. Frosted obscures sightlines for bathrooms and side yards facing neighbors. Low-E coating is our default recommendation for east and west exposures in Kendall, where morning and afternoon sun pours through. The coating reflects infrared heat while passing visible light. Tempered glass is code-required for certain locations - large units, doors, areas near walking surfaces - and provides a safety benefit if breakage occurs. Laminated glass serves double duty: impact resistance for hurricane-prone exposure zones, and significant sound reduction for homes near major roads.

Installation by Sightline Windows & Doors Kendall in Kendall

Window performance lives or dies at installation. A perfectly engineered unit becomes a leaky, rattling liability if the opening isn’t prepared correctly. At Sightline Windows & Doors Kendall, we treat installation as a distinct craft, not an afterthought.

Every project starts with a pre-install inspection. We measure the actual opening, not the existing window - because existing windows are often out of square, and repeating their fit guarantees problems. We check for rot in the sill, proper flashing integration with the wall assembly, and structural integrity of the surrounding framing. In Kendall’s older homes, particularly those built in the 1960s and 70s, we frequently find original windows installed without proper sill pan flashing. We correct that before the new unit goes in.

Setting the frame demands level, plumb, and square - all three, simultaneously, within manufacturer tolerance. Shimming is done with composite materials, not wood that can compress or rot. Fasteners hit structural framing, not just sheathing. The AAMA 812 low-expansion foam sealant fills the perimeter gap with material that stays flexible, doesn’t off-gas and shrink, and provides both air sealing and minimal structural bonding. We see too many installations where generic caulk or the wrong foam type was used; two years later, it’s cracked and leaking.

Our installations comply with AAMA 2400 and 2410 standards, which define proper methods for new construction and replacement applications respectively. These aren’t suggestions - they’re the protocols ViewLux requires for warranty validity. Improper installation voids the manufacturer warranty. That means if your handyman or the lowest Craigslist bid skips steps, you’re carrying 100% of future failure risk yourself.

We finish with a water test, checking operation of all hardware, and cleanup that leaves the site cleaner than we found it. Permits are pulled where required by Miami-Dade County or local Kendall jurisdictions. Final inspection is scheduled and passed before we consider the job complete.

Kendall’s specific climate factors matter here. Our combination of intense UV, salt-laden air even miles inland, and driving rain means installation details that might be optional elsewhere are mandatory here. The foam sealant, the corrosion-resistant fasteners, the proper slope on sill pans - these aren’t upsells. They’re how a window survives fifteen years instead of failing at five.

Frequently Asked Questions - VLX 80 Awning Window

What is the lead time for the VLX 80 Awning Window?

Lead time typically runs 4-6 weeks from final measurement and deposit, depending on glass and finish selection. Custom sizes or specialty glass can extend this slightly. Call (786) 321-3319 to check current production schedules for your specific configuration - estimates are free.

Does the VLX 80 qualify for energy tax credits?

The NFRC-rated thermal break construction and Low-E glass options may qualify for federal energy efficiency tax credits depending on current IRS guidance and your total window replacement scope. We provide the performance documentation your tax preparer needs. For the latest credit applicability, call (786) 321-3319 and we’ll review your project specifics.

What warranty comes with the Awning Window?

ViewLux provides a limited lifetime warranty on the frame and sash, with 20-year glass coverage and 10-year hardware coverage, contingent on authorized installation. Sightline Windows & Doors Kendall registers your warranty and provides our own workmanship guarantee on the installation itself. Warranty claims through unauthorized installers are routinely denied - another reason to verify your contractor’s partner status.

Can I customize the size?

Yes, the VLX 80 is available in custom dimensions to fit existing openings or new construction plans. Our on-site measurement ensures the unit is manufactured to your actual opening, not a nominal size that leaves gaps. Call (786) 321-3319 to schedule measurement and discuss size limitations for your specific application.

How do I maintain aluminum frames?

Wash frames twice yearly with mild soap and water, check weep holes for debris buildup, and lubricate hardware annually with a silicone-based product. Avoid abrasive cleaners or pressure washers that can damage finishes. The powder-coated and anodized finishes on the VLX 80 require no painting or refinishing. If you notice operation changes or seal degradation, call us for inspection - catching issues early prevents bigger problems.

Get a Quote - VLX 80 Awning Window in Kendall

Ready to see how the VLX 80 fits your home? We’ll bring samples, measure your openings, and provide a written line-item quote with no pressure and no obligation. Every project starts with a conversation about what you’re trying to solve - better ventilation, lower energy bills, noise reduction, or updated curb appeal. Call Sightline Windows & Doors Kendall at (786) 321-3319 to schedule your free estimate. We serve homeowners throughout Kendall, The Hammocks, Dadeland, and surrounding Miami-Dade communities.

Written by the team at Sightline Windows & Doors Kendall, authorized ViewLux installation partner serving Kendall, FL.