Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
ViewLux Window Replacement: The Kendall Owner’s Guide
ViewLux window replacement in Kendall typically runs $340-$780 per opening installed, depending on frame size, glazing specification, and whether the original is nail-fin or block-frame mounted. We stock common ViewLux sash, frame, and hardware configurations on our Kendall trucks, and most replacements are measured, written up, and scheduled within a single visit. Most Kendall owners realize their ViewLux unit is failing when the top sash drifts closed on its own, or when condensation appears between the panes of a window that was clear last season.
Which ViewLux Models This Applies To
ViewLux produces three residential lines you’ll find in Kendall homes built between 2015 and 2022: the ViewLux 3000 single-hung series, the ViewLux 5000 double-hung, and the ViewLux 7000 impact-rated line. The 3000 and 5000 share a 2-5/8 inch frame depth and use the same balance shoe and tilt-latch hardware; the 7000 impact line steps to a 3-1/4 inch frame with reinforced interlocks and laminated glass that weighs roughly 40 percent more per square foot. The critical compatibility check is the glass stamp, not the frame color. Flip the sash open and look for the etched code in the lower corner: “VL-3K,” “VL-5K,” or “VL-7K” followed by a four-digit date code. That date code matters because ViewLux changed its balance spring specification in 2019; pre-2019 units use a 5/8 inch coil width, post-2019 uses 3/4 inch, and the shoes are not interchangeable.
We carry both OEM ViewLux hardware and verified aftermarket equivalents from Truth Hardware and Caldwell. For the 7000 impact line, we specify OEM interlocks and keepers only; the structural load path is tested as an assembly, and substituting a non-OEM keeper voids the impact rating. For balance assemblies and tilt latches on the 3000 and 5000 series, the aftermarket equivalents we stock meet the same cycle-test standards and carry our 365-Day Done Right Promise. Sightline Windows & Doors Kendall is an independent service provider; we are not affiliated with ViewLux.
Signs Your ViewLux Window Replacement Is Failing

- Sash won’t stay open or slams shut. The coil balance assembly has lost tension. In Kendall’s humidity, the galvanized springs in ViewLux balances corrode faster than the manufacturer rates; we typically see this at 6-9 years instead of the 15-year specification. The spring isn’t broken, it’s fatigued, and the only fix is replacement.
- Fog or moisture between glass panes. The insulated glass unit (IGU) seal has failed. Once argon escapes and ambient air enters, the desiccant saturates within weeks. In Kendall, where afternoon rain followed by direct sun is routine, thermal pumping accelerates seal failure. The IGU must be fabricated to the exact sightline measurement; a quarter-inch error and the glazing bead won’t seat.
- Cracked or yellowed glazing bead. The vinyl bead that holds the glass in the sash has UV-degraded. ViewLux switched bead formulation around 2018; older beads get brittle and snap during cleaning. We match the bead profile by sightline measurement, not by series name, because ViewLux used three different bead widths across production years.
- Air infiltration at the meeting rail. The interlock weatherstrip has compressed or torn. This is common on south- and west-facing ViewLux units in Kendall, where daily thermal expansion cycles the sash against the frame. The fix is precise: replace the pile height and fin configuration exactly, or the sash won’t tilt properly.
- Frame corner separation or sealant gap. The sash or frame has racked, or the factory corner keys have backed out. In 2016-2017 production, ViewLux used a two-point corner key on the 3000 series that we now reinforce with a stainless steel screw at each joint during replacement. We note this on the written scope before work starts.
Before
AfterReplacement Cost & What’s Included
| Component | Typical Range (Kendall) | What Drives It |
|---|---|---|
| Balance assembly (3000/5000 series) | $340-$480 | Coil count, access difficulty, single vs. both sashes |
| Insulated glass unit (IGU) replacement | $420-$680 | Glass size, Low-E coating, argon fill, impact rating |
| Sash pack (complete sash replacement) | $580-$780 | Frame size, hardware finish, impact vs. non-impact |
| Full frame replacement (same size) | $720-$1,150 | Frame type, exterior trim repair, stucco cutback |
Every replacement includes the measured survey you keep, the written scope with line-item pricing, installation by a background-checked and uniformed technician with license number provided before arrival, and the documented photo record uploaded to your job file. The 365-Day Done Right Promise covers the work under Haven Clause 5: No Surprises. If the written price and the final invoice differ, we eat the difference. That’s been the rule since 2012.
DIY or Call Us?

There is one thing a Kendall owner can safely check: the glass stamp and the date code on the balance cover. Write both down. If the sash is non-impact and you have a stable step stool, you can also confirm whether the tilt latch releases smoothly. Beyond that, we recommend against self-repair.
ViewLux sashes, especially the 7000 impact line, are heavier than they look. A 36-by-60 inch 7000 double-hung sash with laminated glass weighs over 40 pounds. Removing it without proper support risks frame damage, personal injury, or a dropped unit that cracks the IGU. The balance assemblies are under spring tension; releasing a coil without a winding tool can cause the bracket to snap free. And if you mismeasure the replacement IGU by even 3/16 inch, the glazing bead won’t lock and you’ve bought a custom unit that doesn’t fit. We carry the winding tools, the sash supports, and the eight ViewLux bead profiles on our Kendall trucks. Call (786) 321-3319 to schedule your free estimate. We’ll measure once, document it, then cut.
FAQs
In Kendall’s climate, the balance assemblies typically function 6-10 years, IGUs 10-15 years if not impact-rated, and impact-rated IGUs 8-12 years due to the heavier glass load on the seal. South-facing units age faster. Call (786) 321-3319 for an exact quote on your specific units - estimates are free.
No. Once an IGU seal fails, the desiccant is saturated and the spacer assembly is compromised. Repair kits that drill and defog are temporary and void any remaining warranty. We replace the full IGU to the original sightline spec. Call (786) 321-3319 for an exact quote - estimates are free.
A balance or IGU replacement on a standard single-hung takes 45-90 minutes on site. A full sash pack runs 2-3 hours. Full frame replacement is typically a half-day. We schedule the work after the measured survey is complete and the written scope is approved. Call (786) 321-3319 to schedule your free estimate.
We stock balance assemblies, tilt latches, interlocks, and keepers for the 3000, 5000, and 7000 series on our Kendall trucks. IGUs and complete sash packs are fabricated to order from the measured survey, usually delivered within 5-7 business days. Call (786) 321-3319 to confirm availability for your model.
Ready to get a written price before any work starts? Call (786) 321-3319 to schedule your free estimate. We’ll review your ViewLux units, record the exact sightline measurements, and leave you with a documented scope you can compare - or bring us a competitor’s written quote for our free second opinion.
Written by Sonia Raman, Owner, Sightline Windows & Doors Kendall at Sightline Windows & Doors Kendall, serving Kendall and nearby areas.










Before
After
Before
After
Before
After